Combinal Eyebrow and Lash Tint Kit Colour No.7 Natural Brown

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Eyebrow and Lash Tint Kit Colour 4 Graphite Grey

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil. Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Eyebrow and Lash Tint Kit Colour 5 Brown

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Tint Eyebrow and Eyelash Cleanser

Key Features: Effortlessly removes make-up and oil Increases tinting results Easy to use Gentle on the skin How to use: Apply Combinal Eyelash and Brow Cleanser- for eyelashes and eyebrows using a cotton pad. Avoid contact with eyes. Cleanse your lashes, brows and any excess formula moving from inner corners outwards. Rinse with lukewarm water and pat dry Delivery to the UK only

Combinal Complete Eyelash an Eyebrow Tint Starter Kit

Key Features: Long lasting results High quality ingredients Everything you need in one place Includes enough for X amount of treatments Easy to use Simple instructions Kit includes 7 x 15ml Tints (Black, Blue, Blue Black, Brown, Natural Brown, Auburn Brown,and Graphite Grey) 3 x 20ml Hydrogen peroxide 1 x 125ml Colour cleanser 1 x 125ml Eyelash cleanser 1 x 100ml Skin protector cream Eyelash eye pads – 96 pcs 1 x 7ml Velvet Lashes eyelash and eyebrow conditioner 1 x Applicator brush 3 x Plastic mixing dishes 1 x Colour chart 1 x Mini brochure 1 x Bag

Combinal Eyebrow and Lash Tint Kit Colour 2 Blue Black

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Hydrogen Peroxide for Eyelashes and Eyebrows

Key Features: Activates Combinal tints Easy application Creamy consistency How to use Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Eyelash and Eyebrow Tint Brush

Key Features Flat head brush for precise application Mixes and applies tint effortlessly Comfortable to hold Easy to use    

Combinal Eyelash and Eyebrow Premium Tint Developer

Key Features: Shorter application time High colour intensity Long lasting effect Easy to mix How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Mix 2 cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Premium Developer 3 % into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them. Delivery to the UK only

Combinal Eyebrow and Lash Tint Kit Colour 1 Black

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Colour Cleanser Eyebrow and Eyelash Tint Remover

Key Features: Removes unwanted stains from skin Cleans staining on tools and accesories Gentle on the skin How to use: Apply to a cotton pad Remove excess tint spots from the skin (use immediately after tinting) This alcohol remover is best used with Combinal tint colours and accessories Note:  Delivery to UK Only

Combinal Eyebrow and Lash Tint Kit Colour 3 Blue

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Eyebrow and Lash Tint All Colours

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 7 smudge proof colours   No. 1 BLACK- A classic intense black shade for maximum colour depth. The darkest colour in the range and perfect for clients with black to dark brown hair. This colour adds solid definition and volume to the eyelashes. No. 2 BLUE/BLACK- Intense colour with shimmering tones. One of the most popular colours in the range because it suits many skin types. No. 3 BLUE- A vibrant blue fashionable colour. This is a beautiful lighter eyelash type. However, this colour is still extremely popular with darker Eyelash colours as the unique formula adds clear definition and volume. No. 4 GRAPHITE- A dark shade for a natural coverage of grey hair. Perfect for covering grey or white hair and can be used to leave a darker effect when left for a longer processing time. No. 5 BROWN- A glamorous dark brown for a full coverage and a natural look. This colour suits dark-blonde and light brown hair. It can be mixed with the COMBINAL natural brown dye to achieve your desired effect. No. 6 AUBURN BROWN- Perfect for cllients with blonde or very light brown hair for a more natural effect. It can be mixed iwht COMBINAL grey to achieve your desired effect.No. 7 NATURAL BROWN- A versatile brown to emphasise natural brunette looks. This colour suits light to dark brown hair and can be mixed with other COMBINAL tints to achieve your desired shade.