Combinal Eyebrow and Lash Tint Kit Colour No.7 Natural Brown

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Eyebrow and Lash Tint Kit Colour 4 Graphite Grey

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil. Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Eyebrow and Lash Tint Kit Colour 5 Brown

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Complete Eyelash an Eyebrow Tint Starter Kit

Key Features: Long lasting results High quality ingredients Everything you need in one place Includes enough for X amount of treatments Easy to use Simple instructions Kit includes 7 x 15ml Tints (Black, Blue, Blue Black, Brown, Natural Brown, Auburn Brown,and Graphite Grey) 3 x 20ml Hydrogen peroxide 1 x 125ml Colour cleanser 1 x 125ml Eyelash cleanser 1 x 100ml Skin protector cream Eyelash eye pads – 96 pcs 1 x 7ml Velvet Lashes eyelash and eyebrow conditioner 1 x Applicator brush 3 x Plastic mixing dishes 1 x Colour chart 1 x Mini brochure 1 x Bag

Combinal Eyebrow and Lash Tint Kit Colour 2 Blue Black

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Eyebrow and Lash Tint Kit Colour 1 Black

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.

Combinal Eyebrow and Lash Tint Kit Colour 3 Blue

Key Features: Can be used after lash lift and brow lamination Permanent tint for eyelashes and eyebrows Lashes appear fuller and more intense Eyebrows gain fullness, definition, and shape Waterproof colour results that last up to 6 weeks Available in 6 smudge proof colours Kit includes: Tube of Tint (15ml) Hydrogen Peroxide 5% (20ml) Brush Mixing Dish Instructions How to use: Pre-treatment: Remove contact lenses. Remove all eye make-up before tinting the eyelashes and brows by using the non-oily COMBINAL Eye Make-up Remover. Follow with COMBINAL Eyelash Cleanser to eliminate any oily substance from the hair. To achieve the best possible tinting results the eyelashes and brows must be dry and completely free of oil.Preparation: Place 2cm (1 inch) COMBINAL tint with 5 drops of COMBINAL Hydrogen Peroxide into the mixing dish and mix it to a creamy paste immediately before tinting.Application: Eyes must be kept closed throughout the entire process. Avoid contact with eyes. Carefully apply the paste on the lashes using the COMBINAL brush, until they are completely covered. After this step, apply the same, or a brighter colour on top of the eyebrows in the direction of hair growth.Application time for eyelashes: Depending on the desired intensity 8-10 minutesApplication time for eyebrows: Eyebrows need a shorter application time – approx. 2-3 minutes. The appropriate length of application time also depends on the hair structure of the brows and lashes.Cleansing the lashes: After the required application time remove the tint paste from the lashes, using a cotton swab or the COMBINAL brush, by moving it towards the eye pads. Remove the eye pads carefully. Wipe off any remaining tint with water and a cotton pad. Always work from the top down along the lashes.Cleansing the brows: After the required application time remove the tint paste gently in the direction of hair growth.  Any possible skin stains can be removed with the COMBINAL Colour Cleanser.NOTE: To avoid redness and inflammation, please pluck the eyebrows AFTER colouring them.